Anti-Static Materials For Industrial Curtains
Discuss materials for anti-static curtains in industrial partitions. Specify resistance limits, conditioning, visibility and cleaning needs before sampling.
Material references for sampling
Compare these catalog constructions with your finished-product requirements.
These are reinforced antistatic material references for sampling. Confirm the required resistance, test conditions and curtain construction; they are not transparent cleanroom curtain grades.
- Weight
- 650g(±10g)/sqm
- Thickness
- 0.5mm
- Width
- 1.02m-5.0m
- Base fabric
- 1000D
Anti-Static Curtain Materials in use
Industrial partition-material selection where static control is part of the specification, including proposed battery and electronics production areas.
Anti-Static Curtain Materials
An anti-static partition starts with a defined resistance requirement and a practical curtain layout. State the work area being separated, the opening size and whether workers need to see through the curtain. An opaque reinforced sheet and a transparent strip curtain are different material choices.
Battery and electronics production can introduce additional demands for cleaning, surface compatibility or particle control. Describe those requirements explicitly so the material discussion does not rely on the word anti-static alone.
Material Selection
The listed reinforced antistatic fabrics provide a starting point for opaque curtain sampling. They are not transparent cleanroom strip-curtain grades. Match the selected material to the required test method, resistance range and conditioning stated in your specification.
Check the relevant report for the proposed grade and colour. A resistance result for a submitted sample does not establish cleanroom classification, low outgassing, chemical resistance or the performance of an installed partition system.
Panels, Seams And Fastenings
Discuss the hanging method, overlaps, bottom clearance and any electrical connection required by the system designer. Seams, attachments and cleaning can affect the installed arrangement. Evaluate a representative curtain assembly with your static-control procedure.
Include In Your Brief
- Required resistance range, test method and conditioning
- Opaque or transparent construction, panel dimensions and opening layout
- Cleaning chemicals, handling, particle-control or outgassing requirements
- Hanging, joining and any specified electrical connection arrangement
Questions About Anti-Static Curtain Materials
Are the listed antistatic fabrics transparent?
The material references here are reinforced constructions for opaque sampling. If clear visibility or transparent strip curtains are required, state that separately before a grade is proposed.
Does an anti-static report confirm cleanroom suitability?
No. Review the exact sample, method and conditions in the report. Cleanroom, particle, outgassing and system requirements need their own evidence.
Can we specify a particular resistance range?
Send the limit and test conditions with your inquiry. The material and available supporting information must be reviewed for that requirement.
Do you install ESD curtain systems?
We supply materials and basic slitting services. The curtain fabricator and system designer specify the assembly, installation and static-control arrangement.
Specify The Static-Control Requirement
Industrial partition-material selection where static control is part of the specification, including proposed battery and electronics production areas.
We supply roll materials and basic slitting services. Share your drawing, exposure conditions and fabrication method to discuss a material sample for this application.