Inflatable Play Materials
Bounce Houses: Compare fabric options for inflatable play equipment, including coating, reinforcement and fabrication details for the intended play structure.
Material references
Use these grades as a starting point. Confirm the construction and configuration against your application.
- Weight
- 300gsm
- Thickness
- 0.3mm
- Width
- 1.05-3.2m
- Technology
- Lamination / Coating
- Surface
- Glossy/Matte
- Roll length
- 50m
- Weight
- 520gsm
- Thickness
- 0.4mm
- Width
- 1.05-3.2m
- Technology
- Lamination / Coating
- Surface
- Glossy/Matte
- Roll length
- 50m
- Weight
- 610gsm
- Thickness
- 0.5mm
- Width
- 1.05-3.2m
- Technology
- Lamination / Coating
- Surface
- Glossy/Matte
- Roll length
- 50m
- Weight
- 780gsm
- Thickness
- 0.6mm
- Width
- 1.05-3.2m
- Technology
- Lamination / Coating
- Surface
- Glossy/Matte
- Roll length
- 50m
- Weight
- 900gsm
- Thickness
- 0.7mm
- Width
- 1.05-3.2m
- Technology
- Lamination / Coating
- Surface
- Glossy/Matte
- Roll length
- 50m
Inflatable Play Equipment in use
Explore material references for inflatable play structures. Identify the panel function, structure design and the testing requirements for the destination market.
Include in your brief
- Part dimensions, target roll width and production quantity
- Joining, cutting, printing and assembly methods
- Service conditions and required test methods
- Surface finish, colour and any fixed specification values
Define the application.
Describe the finished part, its dimensions and how you fabricate it. Include the working environment and any specified performance or test requirements.
Related applications
Material for inflatable play equipment panels
Describe the chamber, wall, slide or other panel, with its dimensions, target weight and required surface. Identify clear areas or different materials separately. Compare the model-specific inflatable material data and state the finished equipment acceptance criteria; a fabric listing is not certification of a complete inflatable structure.
Show connections to adjacent chambers, seams and reinforced areas. Include printed graphics, colour combinations and the required surface for each section. Trial a sample using your production joining method before confirming the material for a complete item.
For pricing, send the grade or target weight, colours, width, quantity and destination. Request samples for fabrication and appearance checks with the dimensions needed. We will confirm sample and shipping terms; finished-equipment testing remains specific to the assembled design.