Mesh Fabric for Dump Truck Tarps

Mesh covers for open truck bodies

Dump truck mesh tarps cover the open tops of dump trucks and dump trailers carrying bulk materials. They are also described as tipper mesh sheets or net tarps. The open fabric allows air through the cover; its opening size must be considered against the contents being hauled. DuraTarps supplies roll materials for fabricators developing these covers.

Choose the mesh around the load and cover system

Start with the load type, particle size and whether the cover contacts sharp edges. Check the mesh pattern, yarn construction and coating together. Finished weight alone does not establish tear resistance, service life or the size of particles a cover can retain. Fine powders, rain-sensitive loads and hot asphalt need separate material assessment.

For sample comparison, the DLT-BNM PVC-coated polyester mesh range lists constructions from 130 to 450gsm and widths of 1.02–3.2m. These are material references, with truck-cover suitability to be confirmed for the selected grade and fabricated design. No truck-system approval or load-restraint rating is implied.

Plan the fabricated edges

Record the finished cover dimensions, roller arrangement and required end pockets. Repeated winding puts different demands on the cover from a hand-deployed sheet. Review folding behaviour and any points where mesh rubs against the truck body. Trial the proposed hems, webbing, seams and eyelet positions with the selected material before committing to production.

A mesh cover does not provide a sealed waterproof barrier. Openings may allow fine material to escape, depending on the mesh and load. Vehicle suitability, load restraint and any applicable operating requirements must be assessed for the completed covering system.

Send a material brief

Include body and finished-cover dimensions, load description, mesh-opening reference, preferred colour, roll width, quantity and destination. Add photos of the current cover and attachment points, plus any required tensile, tear, abrasion or weathering tests. For other covering arrangements, see roll and sliding tarps or return to Transport & Logistics.

Frequently asked questions

What is the usual name for this cover?

Dump truck mesh tarp is a common product name. Tipper mesh sheet and net tarp are useful alternative search terms. Specify an open-top load cover when requesting material.

Can mesh keep the load dry?

Its openings allow water through. If rain exclusion is required, discuss a suitable solid cover construction and the finished seams and edges.

Can I select a grade by weight alone?

No. Compare mesh openings, reinforcement, coating, fabrication and relevant test results. Request the full grade designation and a representative sample for your cover design.