Fabric Storage Building Materials

Wide PVC tarpaulin references for roof and wall panels on frame-supported industrial storage buildings.

Material references for sampling

Compare these catalog constructions with your finished-product requirements.

These are roll-material references for roof-panel sampling. The building designer sets the requirements for frame attachment, loading and the completed envelope.

DLT-5210

Weight: 750gsm
Thickness: 0.58mm
Width: 5.0m
Base fabric: 1000D*1000D 30*30
Surface: Glossy/Matte
Roll length: 50m

VIEW DETAILS OPEN IN NEW TAB

DLT-5211

Weight: 850gsm
Thickness: 0.65mm
Width: 5.0m
Base fabric: 1000D*1000D 30*30
Surface: Glossy/Matte
Roll length: 50m

VIEW DETAILS OPEN IN NEW TAB

Fabric Storage Buildings in use

Wide PVC tarpaulin references for roof and wall panels on frame-supported industrial storage buildings.

Steel-framed fabric storage building across an industrial service yard · application illustration

Coated fabric panels attached along the wall and roof junction · application illustration

Plan the fabric around the frame

Bay spacing, roll width and seam allowance determine how many roof panels the fabricator needs. The wall pattern also needs to account for door openings, base fastening and the junction with the roof.

Compare wide-format fabric options

DLT-5210 and DLT-5211 are wide reinforced materials listed for tent and hangar applications. They provide references when laying out storage-building roof panels. The building designer specifies the required construction, light transmission, attachment details and project testing.

Roof and wall fabrics for steel-framed storage halls

A fabric storage building uses flexible panels stretched over a frame. Roof and wall panels must meet at the eaves and work around end walls, doors and attachment rails.