PTFE Atrium Daylight Roofs
A PTFE-coated fiberglass roof can create a continuous textile covering above an atrium or courtyard.
Material references for sampling
Compare these catalog constructions with your finished-product requirements.
PTFE material fire classification: A1. Confirm the matching report and supplied configuration for the project.

- Weight
- 1000gsm
- Thickness
- 0.6mm
- Width
- 3-3.8m
- Technology
- Multilayer PTFE coating
- Base fabric
- Fiberglass filaments EC6
- Surface
- Matte

- Weight
- 1150gsm
- Thickness
- 0.65mm
- Width
- 3-3.8m
- Technology
- Multilayer PTFE coating
- Base fabric
- Fiberglass filaments EC6
- Surface
- Matte

- Weight
- 1000gsm
- Thickness
- 0.6mm
- Width
- 3-3.8m
- Technology
- Multilayer PTFE coating
- Base fabric
- Fiberglass filaments EC6
- Surface
- Matte
PTFE Atrium Daylight Roofs in use
A PTFE-coated fiberglass roof can create a continuous textile covering above an atrium or courtyard.

Review the chosen sample with the interior context
Material colour, transmitted light and the surrounding finishes influence the appearance of an atrium. Inspect the proposed sample under relevant lighting conditions. Confirm the chosen grade and configuration rather than transferring appearance or performance values from another fabric.
Application brief
- Atrium geometry: Provide roof spans, panel shapes, support positions and perimeter conditions.
- Daylight brief: Describe the intended light character and the material data needed for the building assessment.
- Water and enclosure: Show drainage, weathering, penetrations and connections to surrounding roofs or walls.
- Access and maintenance: Allow for inspection, cleaning and future panel replacement in the proposed arrangement.
Questions about this application
Is an atrium membrane transparent like glass?
No. PTFE-coated fiberglass is a coated textile. Review its sample and listed transmission data for the intended diffused-light effect.
Does a light-transmission value predict room brightness?
No. The complete atrium geometry, roof area, orientation and interior surfaces also affect the result.
Can a roof material claim establish the atrium's fire approval?
No. Review the relevant material report and the complete installed construction against the project's requirements.
Diffuse daylight through a textile roof
A PTFE-coated fiberglass roof can create a continuous textile covering above an atrium or courtyard. Review the desired daylight character alongside the roof geometry, perimeter connection, drainage and building-enclosure requirements.
PTFE-coated fiberglass membrane is different from clear glazing. Its listed light-transmission data describe a particular material construction; the roof's indoor lighting result also depends on area, orientation, room geometry and other surfaces.
For an enclosed atrium, the roof brief must address more than the membrane surface. Discuss the supporting frame, seams, perimeter weathering, ventilation interfaces and maintenance access with the project team. These design requirements should accompany the material sample enquiry.
