PTFE Facade Mesh

PTFE-coated fiberglass facade mesh forms an open outer screen in front of a building enclosure.

Confirm the view through a physical sample

Mesh appearance changes with viewing angle, light direction, distance and the background. A large photograph cannot replace a sample review. Agree the openness and finished appearance for the order, and check the material, edge detail and support arrangement as one proposed screen system.

Application brief

  • Elevation and panel size: Provide the bay layout, panel dimensions and the location of doors, corners and changes in level.
  • Frame and standoff: Show the perimeter frame, brackets, support gap and access space behind the screen.
  • Appearance: Review a physical sample for openness, colour, viewing distance and the glazing behind it.
  • Attachment and loads: Confirm the edge treatment and project-specific design requirements with the facade engineer.

Questions about this application

Is PTFE facade mesh waterproof?

An open mesh is a screen, not a continuous waterproof enclosure. Review the weather-enclosing wall or glazing separately.

Will the mesh always look transparent?

No. Perceived visibility depends on openness, viewing angle, lighting, distance and what is behind the screen.

Does the mesh come with a building approval?

A material datasheet or A1 classification does not establish approval of the complete facade assembly. Confirm the required report and design scope for the project.

Design the screen as a separate facade layer

PTFE-coated fiberglass facade mesh forms an open outer screen in front of a building enclosure. Review the mesh appearance, panel frame, attachment details and relationship to the glazing before selecting the material.

A facade screen can sit outside glazing or another weather-enclosing wall. The screen's open construction affects what is visible through it and how the elevation reads from different distances. Its role must be distinguished from the enclosure behind it.

The current mesh range includes DLT-PJM4000 and DLT-PJM5000. Both list 700gsm, 2–4m width and 25–35% openness, with different listed tensile values. Confirm the actual sample, selected configuration and frame design for the proposed elevation.