DLT-5222
Awning Fabric for Pergola Roof Panels
A PVC film and polyester composite with several surface options for retractable awnings.
- Weight
- 680gsm/23oz
- Width
- 1.05-5.1m
Product images
TECHNICAL DATASHEET
| Structure: | PVC film+polyester base fabric+PVC film |
|---|---|
| Base fabric: | 1000D 20*20 |
| Weight: | 680gsm/23oz |
| Width: | 1.05-5.1m |
| Tensile Strength: | 2500/2000 N/5cm |
| Tear Strength: | 550/320 N/5cm |
| Adhesion Strength: | 60 N/5cm |
| Surface: | Glossy / Matte / Embossed / Acrylic coated |
| Blockout: | Extra blockout layer available |
| Colour: | Customized |
| Temperature: | -30~+70(°C) |
| FR certification: | Customized B1, B2, M1, M2, NFPA701, DIN75200; |
| Packing: | Paper tube+PE film+Craft paper |
| MOQ: | 3000yards for customization/ 100yards for in-stock |
APPLICATIONS:
Product Features
- Flame retardantOptionalAvailable as an optional configuration. A flame-retardant formulation for fabricators supplying projects with defined fire-behaviour requirements. Select the grade around the test method required for the finished application.
- BlockoutOptionalAvailable as an optional configuration. Restricts light passing through the fabric for roof, curtain or cover panels that need an opaque finish and greater control of the light behind the surface.
Film Faces and Textile Reinforcement
DLT-5222 places a polyester base between two PVC film faces. The listed 1000D, 20×20 reinforcement and 680gsm finished mass describe different parts of that composite. When comparing samples, check the base specification alongside the surface and layer bond. The model data does not identify a precise coating or laminating route, so the layer description is the appropriate starting point for production discussions.
An Awning Surface Selected Before Fabrication
Glossy, matte, embossed and acrylic-coated surfaces give DLT-5222 several listed configurations. Specify the intended version before testing a pergola panel seam, since the actual surface is part of the joining sample. Optional blockout should also be included in that review. Match the usable roll width to the panel pattern, leaving allowances for hems, seams and the attachment system used on the finished roof.
Application requirements — Pergola Roofs
Specify the covered span, panel dimensions, support arrangement, installed tension and exposure. Review tensile and tear properties, coating adhesion, seam performance and the reinforcement around edges and attachment points. Set weathering, cleaning and fire-behaviour requirements around the finished structure and destination; the fabric data sheet does not establish structural wind or snow capacity.
Finished Folding-Pergola Configurations
A folding fabric roof is sized as part of its supporting system. Confirm the frame drawing before setting the cover dimensions.
| Specification | Configuration |
|---|---|
| Single-Field Size Example | Up to 7 m wide × 6.5 m projection in a finished folding-pergola system |
| Fabric Movement | Retractable folding roof carried by crossbars and guided along the frame |
| Drainage Arrangement | Water directed along the side profiles to a front gutter |
| Roof Fall | Set the slope from the selected system's drainage requirements; avoid treating a fabric test as proof of roof drainage |
| Mounting | Wall-mounted structure or installation within a suitable existing support frame |
| Cover Fabrication | Confirm crossbar spacing, attachment pockets and the folded stack against the system drawing |
| Operation | Motor-driven movement in the example system; keep the full travel path clear |
| Exposure Limits | Confirm wind, rain and seasonal operating limits for the complete installed assembly |
Construction Details
Crossbars And Folded Fabric
The cover folds between moving crossbars as the roof retracts. Pocket spacing and attachment positions must follow the frame rather than a standard roll length.
Gutter And Water Path
Plan the fabric fall together with the side profiles and front gutter. Check joints and the outlet path on the installed roof.
Product Videos 1 video
Outdoor PVC Awning Fabric
Product Overview
Discuss the application.
For awning fabric rolls, provide the pergola panel layout, selected surface and blockout requirement.
Awning Fabric: PVC Faces Around a Polyester Base
DLT-5222 is awning fabric with a stated PVC film, polyester base and PVC film construction. The base is specified as 1000D with a 20×20 construction, and the finished material is listed at 680gsm. The polyester forms the reinforcing framework within the sheet, while the PVC faces provide the exposed material surfaces.
This film-and-textile description explains the layers without establishing a particular manufacturing method. The exact bonding route should be confirmed when process details matter to the order. The listed adhesion value concerns the bond within the sheet; it should not be read as a finished seam rating. Fabrication introduces a different joint that must be evaluated using the intended equipment and overlap.
Glossy, matte, embossed and acrylic-coated surface selections are listed for DLT-5222. An extra blockout layer is optional, and custom colours are available. These choices should be fixed before approving appearance or joining samples. The stated width range is 1.05m to 5.1m, so a fabricator should confirm the available usable width for the chosen construction rather than assume every finish is stocked at every width.
For proposed pergola roof panels, a sample can connect the material decisions to the roof design. Assess the selected face, visible light control and representative seams, then develop the panel edges around the support and drainage arrangement. A roll fabric specification does not establish the wind rating of the pergola. Fire-performance needs should be supported by documentation for the actual ordered version.