DLT-6203
Bolster Cover Vinyl
A layered PVC and polyester fabric for therapy bolster covers.
- Weight
- 350gsm
- Width
- 1.05-3.2m
Product images
TECHNICAL DATASHEET
| Technology: | Lamination / Coating |
|---|---|
| Structure: | PVC film+Woven polyester base fabric+PVC film / 3 layers laminated |
| Surface: | Glossy/Matte |
| Base fabric: | 300*500D 18*9 |
| Weight: | 350gsm |
| Thickness: | 0.3mm |
| Width: | 1.05-3.2m |
| Temperature resistance: | -20~70°C |
| Options: | Anti static, Anti fungus, Anti mildew |
| Roll length: | 50m |
| Packing: | Paper tube+PE film+Craft paper |
APPLICATIONS:
Product Features
- AntistaticOptionalAvailable as an optional configuration. Helps manage electrostatic charge build-up in the fabric, giving manufacturers a material option for assemblies with specified static-control requirements.
- Mildew resistantOptionalAvailable as an optional configuration. A mildew-resistant formulation helps address surface growth in damp or humid service conditions and during storage between uses.
Curved Covers Still Begin as Flat Material
DLT-6203 arrives as a roll with a defined polyester reinforcement and PVC film faces. A therapy bolster cover converts that flat sheet into a curved form with joined end panels. Consider the panel orientation and closure position when reviewing the material. Its listed weight and thickness describe the sheet itself, while the finished shape also depends on the cutting pattern, joins and the insert beneath it.
Surface Selection and Cleaning Review
Glossy and matte options give different visible surfaces, but neither name establishes compatibility with every cleaning product. Select the intended DLT-6203 finish and review it with the proposed cleaning conditions. Include the closure and a representative joint in the cover sample. Any optional antistatic or mildew-related treatment should be identified in the agreed specification rather than inferred from the general medical fabric category.
Application requirements — Medical Mattress & Care Covers
Specify the finished dimensions, cleaning or disinfecting agents, cleaning frequency and the seam or closure arrangement. Review fluid protection, flexibility, abrasion and seam performance under the intended cleaning conditions. Any antibacterial, biocompatibility or regulated-use claim must be supported for the exact material and finished application.
Finished Mattress-Cover Configurations
Cover dimensions follow the mattress core and its shape. These examples establish size and construction only; clinical performance belongs to the complete mattress system.
| Specification | Configuration |
|---|---|
| Mattress Size Example | 198 × 88 × 15 cm |
| Overlay Size Example | 198 × 88 × 9 cm |
| Panel Pattern | Top, side and base panels cut to the actual core dimensions |
| Seam Construction | Sewn or welded construction, selected for the required finished-cover design |
| Base Interface | Confirm grip and fit against the bed or underlying mattress |
| Cleaning Specification | Agree the cleaning agents, temperatures and method for the exact finished cover |
| Replacement Fit | Confirm core corners, any openings and the cover removal arrangement |
| Finished Assembly | Assess the cover with the mattress core; do not infer pressure-management or clinical claims from the fabric |
Construction Details
Corners And Core Fit
Allow for the core's edge shape and movement when setting the finished cover pattern.
Seams And Cleaning
Review the complete seam construction under the intended cleaning process, including the junction between side and base panels.
Material Insights 3 videos
Heavier Isn't Always Stronger: Choosing PVC Tarpaulin
Material Guide
Discuss the application.
For bolster cover vinyl, provide the cover shape, closure detail, finish and cleaning requirements.
PVC and Polyester Layers for Therapy Bolster Covers
DLT-6203 is a 350gsm material listed at 0.3mm thick. Its construction places a woven polyester base between two PVC films. The reinforcement uses 300D × 500D yarn in an 18 × 9 arrangement. This separates the material into a textile framework and film faces: the polyester provides the base structure, while the PVC forms the exposed surfaces that are handled during cover assembly and use.
The technology entry is lamination/coating and the layer description identifies a three-layer laminate. These entries do not specify a knife process or detailed production conditions. Glossy and matte finishes are available choices in the record. On a therapy bolster, the selected face becomes part of a curved cover with long joints and end sections, so the roll sample should be reviewed in the intended shape rather than judged only as a flat swatch.
The listed width range is 1.05–3.2m, with 50m rolls. A bolster pattern should account for panel orientation, the joining arrangement and the opening used to insert or remove the cushion. The 350gsm and 0.3mm values identify the cover material; they do not describe the foam or establish the support characteristics of the finished bolster. Specify cleaning and contact requirements with the actual cover design. Optional antistatic and fungus or mildew-related treatments need confirmation on the selected configuration. A fabricated sample can then bring those material choices together with the joints, closure and curved surfaces of the finished cover.