DLT-RM1002
Gate Screening Strips
Three-layer PVC and polyester strips for gate screening.
- Weight
- 650gsm
- Thickness
- 0.5mm
Product images
TECHNICAL DATASHEET
| Technology: | Knife coating/Laminating |
|---|---|
| Base fabric: | 300Dx500D 18*12 |
| Structure: | PVC film+Polyester base fabric+PVC film / 3 layers laminated |
| Surface: | Glossy/Matt |
| Colours: | White/Grey/Blue/Green/Black/Printed or customized |
| Thickness: | 0.5mm |
| Weight: | 650gsm |
| Dimension: | 19*35cm/7.48*13.78inch; 19*65cm/7.48*25.59inch or customized width and length |
| Life span: | 3-5years |
| Feature: | Waterproof, UV-resistant, long service life, with fixed clip can be installed easily |
| Packing: | Poly Bag+Paper Box+Pallets |
APPLICATIONS:
Product Features
- UV resistantUV-resistant treatment addresses sunlight exposure in outdoor fabric panels, making weathering requirements part of the material choice from the start.
A 0.5mm Fabric Reinforced Laminate
RM1002 combines a 300D×500D polyester base with PVC film on each side. Its listed 650gsm mass belongs to that full construction. The textile supports the sheet internally while the films provide the exposed faces. When comparing samples, record thickness alongside weight and surface finish; a single measurement does not describe the whole laminate or explain how it will bend in a gate infill.
Evaluate The Strip At Its Retainers
A laminated strip changes shape where it passes around a bar or meets a clip. Include those details in the material trial so the layer bond and finished edges can be reviewed under the intended bend. Agree the manufacturing route if it is a purchasing requirement, since the technology field lists more than one term. Gate loading and the design of the retaining system remain separate from the roll material specification.
Application requirements — Fence & Privacy Screens
Specify finished dimensions, the support and joining arrangement, handling cycles and working conditions. Review the relevant tensile, tear, adhesion, flexing and seam properties with the proposed material configuration. Provide any required test methods, exposure and cleaning conditions so that the material and finished assembly can be assessed for the intended application.
Finished Fence-Screen Configurations
Define each screen by its fence run and fixing points. Perimeter reinforcement and attachments should be selected with the supporting fence in mind.
| Specification | Configuration |
|---|---|
| Finished Height | Match the fence layout and the specified top and bottom clearance |
| Finished Length | Measured fence run, split at gates and other interruptions |
| Edge Reinforcement Example | 2 in polypropylene webbing |
| Eyelet Example | 3/8 in brass grommets |
| Eyelet Spacing Example | 24 in on centre |
| Attachment Examples | Suitable fence ties or galvanised hog rings |
| Corner Arrangement | Reinforced corners with multiple fixing positions |
| Support Check | Review the fence posts, anchorage and exposure for the completed screen |
Construction Details
Bound Edge
Webbing reinforces the perimeter where grommets connect the panel to the fence.
Fixing Layout
Position attachments around the panel, including its lower edge, and keep access openings independently operable.
Material Insights 3 videos
Heavier Isn't Always Stronger: Choosing PVC Tarpaulin
Material Guide
Discuss the application.
For a gate screening strip quotation, provide the RM1002 finish, strip dimensions and retaining arrangement.
Laminated Material For Gate Screening Strips
DLT-RM1002 gate screening strips are specified as PVC film laminated around a polyester base fabric. The construction has three layers and uses a 300D×500D base with an 18×12 notation. The outer films cover the textile, giving the strip a continuous surface. Its structure differs from an open mesh infill and should be selected with the desired screening effect in mind.
This model is listed at 0.5mm and 650gsm. Those values describe the finished laminated sheet, not individual coating layers. The fabric remains an internal reinforcing component. A thicker or heavier laminate alone does not establish the capacity of a gate or its fixings; the complete gate infill needs to be considered as an assembly with its own frame and attachment spacing.
Lamination joins formed film with the supporting fabric. Knife coating is also named in the product technology field, but a specific manufacturing sequence is not provided. Confirm the agreed construction when requesting a production sample. The practical review should include the bond between layers at a cut edge and the way the selected strip bends around the intended gate bars or retaining parts.
The record offers glossy or matte surfaces and several colours, with printing or custom colour also listed. Review the actual strip rather than judging its appearance from a colour name. For a gate infill, make a short fitted section using the proposed retaining clips and edge detail. That sample establishes the required strip size, bend and finish while preserving the material identification for the order.