DLT-5102
PVC Inflatable Fabric for Slide Panels
Woven polyester sits between PVC films in this material for inflatable play structures.
- Weight
- 520gsm
- Width
- 1.05-3.2m
Product images
TECHNICAL DATASHEET
| Technology: | Lamination / Coating |
|---|---|
| Structure: | PVC film+Woven polyester base fabric+PVC film / 3 layers laminated |
| Surface: | Glossy/Matte |
| Thickness: | 0.4mm |
| Weight: | 520gsm |
| Width: | 1.05-3.2m |
| Roll length: | 50m |
| Packing: | Paper tube+PE film+Craft paper |
| MOQ: | 1000yards for customization/ 100yards for in-stock |
APPLICATIONS:
Product Features
- Flame retardantOptionalAvailable as an optional configuration. A flame-retardant formulation for fabricators supplying projects with defined fire-behaviour requirements. Select the grade around the test method required for the finished application.
Film and Textile Work Together
DLT-5102 combines a woven polyester centre with flexible PVC films. The core gives the composite its textile reinforcement; the visible surface is PVC. At 520gsm and 0.4mm, the figures describe the entire sheet. Neither number gives a separate coating weight or a seam-strength result. Keeping those distinctions clear helps buyers compare material samples against the same construction and test requirements.
From Laminate to Slide Panel
The laminated construction describes how the sheet is assembled before fabrication. Cutting, joining and reinforcement then turn it into an inflatable panel. For DLT-5102, use the intended glossy or matte version for those trials. Slide contact surfaces, seam placement and the inflation system should be reviewed as part of the proposed finished design, with the fabric configuration recorded alongside the trial results.
Application requirements — Inflatable Play Equipment
Specify the structure dimensions, panel function, operating pressure, seam design and anchoring arrangement. Review tensile and tear properties, flexing and the integrity of welded or sewn connections. Confirm whether the construction needs an airtight skin or continuous airflow. Assess leakage, loading and any destination-market requirements on the finished inflatable structure.
Finished Bounce-House Configurations
These configurations describe continuous-air bounce houses. Airtight inflatables need a different seam and pressure design.
| Specification | Configuration |
|---|---|
| Square Footprints | 13 × 13 ft or 15 × 15 ft (approximately 3.96 × 3.96 m or 4.57 × 4.57 m) |
| Overall Height Example | 13 ft (approximately 3.96 m) for the square configurations |
| Air Supply | Continuous blower operation; match the blower and intake arrangement to the complete unit |
| Panel Assembly | Sewn body panels, with double or quadruple stitching used in commercial constructions |
| Wear Areas | Additional reinforcement around the jumping surface, entrances and other high-traffic areas |
| Anchoring Connections | Tie-down straps attached through reinforced fabric areas; layout and restraint loads follow the finished-unit design |
| Enclosure And Access | Mesh viewing panels, a defined entrance and accessible inflation/deflation openings |
| Finished-Unit Selection | Confirm usable play area, user limits, installation clearance and operating instructions with the unit manufacturer |
Construction Details
Reinforced Strap Attachment
An extra layer of PVC fabric spreads the attachment over a larger area. Review the strap, stitching and reinforcing patch together when sampling the assembly.
Air Intake And Deflation
Intake sleeves connect the blower to the inflated body. The finished layout needs access to its closure flaps and deflation openings for packing and inspection.
Material Insights 3 videos
Heavier Isn't Always Stronger: Choosing PVC Tarpaulin
Material Guide
Discuss the application.
For PVC inflatable fabric rolls, include the slide-panel drawing, selected surface and proposed seam method in the sample request.
PVC Inflatable Fabric: Film, Fabric and Seams
DLT-5102 is PVC inflatable fabric built around a woven polyester reinforcement, with PVC film on both faces. The listed three-layer sheet weighs 520gsm and is 0.4mm thick. The internal weave and the outer films do different jobs: the textile reinforces the panel, while the flexible PVC forms the exposed surface used when the material is cut and joined.
The product specification identifies lamination/coating and a laminated structure. The film-to-fabric interface is therefore part of the material construction. Adhesion at this interface should be assessed separately from the strength of a seam made by the fabricator. A seam can involve two complete sheets and their surface layers, so it cannot be judged solely from the appearance or thickness of a loose sample.
For proposed inflatable slide panels, the chosen surface also deserves attention. Glossy and matte options are listed, but these descriptions refer to appearance. They do not provide a measured sliding friction value or establish suitability for a particular slide design. Review the actual finish with the finished-product designer, including how the surface is joined to surrounding colours and reinforced areas.
The stated width range is 1.05m to 3.2m, with material supplied in 50m rolls. A cutting plan should allow for overlaps, curved panel shapes and the orientation of the reinforcing fabric. Joining trials and a representative fabricated section help connect the roll specification to the proposed equipment.