DLT-RM1001
PVC Privacy Strips
PVC privacy strips with a polyester core and continuous PVC faces for fence screening.
- Weight
- 450gsm
- Thickness
- 0.4mm
Product images
TECHNICAL DATASHEET
| Technology: | Knife coating/Laminating |
|---|---|
| Base fabric: | 300Dx500D 18*12 |
| Structure: | PVC film+Polyester base fabric+PVC film / 3 layers laminated |
| Surface: | Glossy/Matt |
| Colours: | White/Grey/Blue/Green/Black/Printed or customized |
| Thickness: | 0.4mm |
| Weight: | 450gsm |
| Dimension: | 19*35cm/7.48*13.78inch; 19*65cm/7.48*25.59inch or customized width and length |
| Life span: | 3-5years |
| Feature: | Waterproof, UV-resistant, long service life, with fixed clip can be installed easily |
| Packing: | Poly Bag+Paper Box+Pallets |
APPLICATIONS:
Product Features
- UV resistantUV-resistant treatment addresses sunlight exposure in outdoor fabric panels, making weathering requirements part of the material choice from the start.
Film Faces Around A Polyester Base
The three-layer construction places polyester reinforcement between two PVC films. It produces a continuous privacy strip with an internal fabric base, rather than the visible holes of mesh. At 0.4mm and 450gsm, the stated measurements belong to the full composite. Check the selected surface and colour on a sample, including its reverse side, because both faces may remain visible once it is woven through a railing.
Specify The Route And Finished Strip
The record includes knife coating and laminating, but the documented layer arrangement is a film and fabric laminate. A buyer who needs a particular processing route should include that requirement with the strip dimensions and finish. Fabricators can then test the supplied construction using their actual cutting and clipping method. Keep the approved strip sample as the reference for colour, edge condition and handling on subsequent orders.
Application requirements — Fence & Privacy Screens
Specify finished dimensions, the support and joining arrangement, handling cycles and working conditions. Review the relevant tensile, tear, adhesion, flexing and seam properties with the proposed material configuration. Provide any required test methods, exposure and cleaning conditions so that the material and finished assembly can be assessed for the intended application.
Finished Fence-Screen Configurations
Define each screen by its fence run and fixing points. Perimeter reinforcement and attachments should be selected with the supporting fence in mind.
| Specification | Configuration |
|---|---|
| Finished Height | Match the fence layout and the specified top and bottom clearance |
| Finished Length | Measured fence run, split at gates and other interruptions |
| Edge Reinforcement Example | 2 in polypropylene webbing |
| Eyelet Example | 3/8 in brass grommets |
| Eyelet Spacing Example | 24 in on centre |
| Attachment Examples | Suitable fence ties or galvanised hog rings |
| Corner Arrangement | Reinforced corners with multiple fixing positions |
| Support Check | Review the fence posts, anchorage and exposure for the completed screen |
Construction Details
Bound Edge
Webbing reinforces the perimeter where grommets connect the panel to the fence.
Fixing Layout
Position attachments around the panel, including its lower edge, and keep access openings independently operable.
Material Insights 3 videos
Heavier Isn't Always Stronger: Choosing PVC Tarpaulin
Material Guide
Discuss the application.
For PVC fence strip samples, confirm the RM1001 construction, surface finish and balcony fitting dimensions.
Reinforced PVC Privacy Strips
DLT-RM1001 PVC privacy strips use a three-layer laminated structure: PVC film, polyester base fabric and PVC film. The listed base is 300D×500D with an 18×12 construction notation. The supporting textile sits within continuous film faces, producing a solid strip rather than an open screen mesh. This distinction matters when selecting material to obscure a balcony railing or fence opening.
The specified finished thickness is 0.4mm and the weight is 450gsm. These describe the whole composite, including both films and the fabric. The different yarn sizes identify the reinforcement in its two directions; they do not give separate film gauges. An exposed cut edge or an agreed construction sample can help a fabricator understand how the layers are arranged before developing an edge treatment.
The product record lists knife coating and laminating as technology terms, while its explicit structure describes a three-layer laminate. Lamination brings formed film and reinforcement together. Knife coating meters PVC compound over a support before it is gelled. Confirm the production route for the ordered strip when that distinction matters to processing; the listing does not document a sequence combining both operations.
Glossy and matte surfaces and a range of colours are available in the record. For balcony privacy strips, compare appearance from both sides under daylight, then review the actual clipping arrangement and exposed edges. The final screen needs an attachment plan suited to its location. Material dimensions, pattern and finish should be agreed on the approved sample before cutting the production strips.