DLT-5804
PVC Vinyl Fabric for Industrial Door Curtains
A layered PVC and textile laminate for industrial curtains, impact doors and high-speed door panels.
- Weight
- 2000gsm
- Width
- 1.05-3.2m
Product images
TECHNICAL DATASHEET
| Technology: | Laminated |
|---|---|
| Structure: | 5LAYERS [PVC FILM+BASE FABRIC+PVC FILM+BASE FABRIC+PVC FILM] |
| Base fabric: | 1000D*1000D |
| Weight: | 2000gsm |
| Thickness: | 3.0mm |
| Width: | 1.05-3.2m |
| Roll length: | 50m/100m |
| Surface: | Glossy/Matte |
| Blockout: | Extra blockout layer available |
| Tensile Strength | 4000/4000 N/5cm DIN53354 |
| Tear Strength | 600/500 N/5cm DIN53356 |
| Adhesion | 100 N/5cm DIN53357 |
| Colour: | Customized |
| Temperature: | -20~+70(°C) |
| FR certification: | Customized B1, B2, M1, M2, NFPA701, DIN75200; |
| Surface: | Double side acrylic larquered, Tear-Resistant, Waterproof |
| Packing: | Paper tube+PE film+Craft paper |
| MOQ: | 3000meters for customization/ |
APPLICATIONS:
Product Features
- Flame retardantOptionalAvailable as an optional configuration. A flame-retardant formulation for fabricators supplying projects with defined fire-behaviour requirements. Select the grade around the test method required for the finished application.
- BlockoutOptionalAvailable as an optional configuration. Restricts light passing through the fabric for roof, curtain or cover panels that need an opaque finish and greater control of the light behind the surface.
Two Textile Layers in One Composite
The five-layer sequence in DLT-5804 includes two base fabrics separated by PVC film. PVC also forms both exposed faces. This arrangement is specifically different from the common three-layer description of one textile between two PVC faces. The 2000gsm weight and 3.0mm thickness describe the complete stack; the current table does not divide either measurement into individual layers or state the mass of each reinforcement.
Laminating a Thicker Sheet
Lamination bonds the film and fabric layers into a sheet for later cutting and joining. DLT-5804’s listed thickness should be carried into trials around overlaps, edges and moving panel connections. A joint adds further thickness locally, so check the actual construction against the intended hardware. The listed acrylic finish also belongs on the sample used to establish the conversion method and final surface appearance.
Application requirements — Industrial Curtains
Specify the opening width and height, panel travel, operating cycles and the edge or track arrangement. Review flexing, abrasion, tear resistance and seam behaviour at repeated contact points. Identify the cleaning, temperature, visibility and any fire-behaviour requirements of the installation; material selection should follow the finished door or curtain design.
Finished Industrial Divider Configurations
Divider panels follow the opening and the way the curtain moves. Specify the finished drop from its suspension point, including floor clearance.
| Specification | Configuration |
|---|---|
| Panel Width And Drop | Made to the measured opening; include any required overlap or fullness |
| Suspension | Sliding roller hooks in an overhead track, or fixed mounting for a stationary divider |
| Panel Connections | Hook-and-loop joining strips or magnetic closures, selected for the working environment |
| Vision-Panel Example | 54 in (approximately 1.37 m) high clear section; position and size can be specified |
| Floor-Sweep Example | 6 in (approximately 152 mm) high detachable sweep |
| Lower Hem | A chain pocket or pipe pocket can add weight where the curtain arrangement requires it |
| Upper Gap | Separate valance panel where the overhead structure leaves a gap |
| Access Layout | Define opening positions, parked curtain space and any fixed sections |
Construction Details
Track And Reinforced Top Edge
The hanging points carry the curtain into its roller track. Match their spacing to the hardware and allow for the curtain's parked stack.
Replaceable Floor Sweep
A detachable sweep closes the gap at floor level and can be replaced independently. The finished drop must allow for the actual floor profile.
Product Videos 1 video
High-Speed Door Fabric
Product Overview
Discuss the application.
For PVC vinyl fabric rolls, provide door panel drawings, joint details and clearance requirements for a sample of the selected five-layer construction.
PVC Vinyl Fabric With a Five-Layer Construction
DLT-5804 has a specified five-layer structure: PVC film, base fabric, PVC film, base fabric and PVC film. The table lists 1000×1000D reinforcement, 2000gsm finished weight and 3.0mm thickness. Unlike a single textile core between two faces, this construction includes two textile layers with a polymer layer between them, as well as the outside PVC faces.
The stated production method is lamination. Formed PVC layers and reinforcement are combined as a bonded sheet. Each textile layer contributes to the composite structure, while the interfaces connect the stack. The current data does not give individual layer thicknesses or an adhesive formulation, so those details cannot be calculated from the overall 3.0mm measurement.
Tensile strength is listed at 4000/4000N/5cm, tear strength at 600/500N/5cm and adhesion at 100N/5cm. More layers do not automatically establish a higher finished-door rating. The material values should be considered alongside bending behaviour and the proposed edge and seam details, particularly when panels are expected to move through an opening.
Glossy and matte faces are listed, together with an optional extra blockout layer. Available widths are 1.05m to 3.2m, with 50m or 100m rolls. A technical-table entry also describes double-sided acrylic lacquer. Confirm the exact finish on the supplied sample before conversion. Industrial door curtains need their own review of panel joints, attachments and operating clearance as a complete assembly.