DLT-5105
Glossy Tarpaulin for Inflatable Arches
A woven polyester laminate faced with PVC for inflatable play structures.
- Weight
- 900gsm
- Width
- 1.05-3.2m
Product images
TECHNICAL DATASHEET
| Technology: | Lamination / Coating |
|---|---|
| Structure: | PVC film+Woven polyester base fabric+PVC film / 3 layers laminated |
| Surface: | Glossy/Matte |
| Thickness: | 0.7mm |
| Weight: | 900gsm |
| Width: | 1.05-3.2m |
| Roll length: | 50m |
| Packing: | Paper tube+PE film+Craft paper |
| MOQ: | 1000yards for customization/ 100yards for in-stock |
APPLICATIONS:
Product Features
- Flame retardantOptionalAvailable as an optional configuration. A flame-retardant formulation for fabricators supplying projects with defined fire-behaviour requirements. Select the grade around the test method required for the finished application.
The Reinforcement Within a Heavy Sheet
DLT-5105 has a woven polyester centre enclosed by PVC films. Its 900gsm value includes the fabric and both surface layers. Extra sheet mass can come from different parts of a composite, so mass does not reveal yarn size or establish tensile strength. Review the stated structure and the actual material sample together, particularly where an inflatable pattern places tension across seams or attachment zones.
Gloss and Fabrication Trials
The glossy option describes the appearance of the PVC face. It does not identify a different base weave or confirm suitability for a particular ink system. For DLT-5105, retain an approved glossy sample in the chosen colour and use that configuration in joining and artwork trials. Inspect the surface around curved seams and reinforced patches, where the finished panel geometry can alter how reflections appear.
Application requirements — Inflatable Play Equipment
Specify the structure dimensions, panel function, operating pressure, seam design and anchoring arrangement. Review tensile and tear properties, flexing and the integrity of welded or sewn connections. Confirm whether the construction needs an airtight skin or continuous airflow. Assess leakage, loading and any destination-market requirements on the finished inflatable structure.
Finished Bounce-House Configurations
These configurations describe continuous-air bounce houses. Airtight inflatables need a different seam and pressure design.
| Specification | Configuration |
|---|---|
| Square Footprints | 13 × 13 ft or 15 × 15 ft (approximately 3.96 × 3.96 m or 4.57 × 4.57 m) |
| Overall Height Example | 13 ft (approximately 3.96 m) for the square configurations |
| Air Supply | Continuous blower operation; match the blower and intake arrangement to the complete unit |
| Panel Assembly | Sewn body panels, with double or quadruple stitching used in commercial constructions |
| Wear Areas | Additional reinforcement around the jumping surface, entrances and other high-traffic areas |
| Anchoring Connections | Tie-down straps attached through reinforced fabric areas; layout and restraint loads follow the finished-unit design |
| Enclosure And Access | Mesh viewing panels, a defined entrance and accessible inflation/deflation openings |
| Finished-Unit Selection | Confirm usable play area, user limits, installation clearance and operating instructions with the unit manufacturer |
Construction Details
Reinforced Strap Attachment
An extra layer of PVC fabric spreads the attachment over a larger area. Review the strap, stitching and reinforcing patch together when sampling the assembly.
Air Intake And Deflation
Intake sleeves connect the blower to the inflated body. The finished layout needs access to its closure flaps and deflation openings for packing and inspection.
Material Insights 3 videos
Heavier Isn't Always Stronger: Choosing PVC Tarpaulin
Material Guide
Discuss the application.
For glossy tarpaulin rolls, share the proposed arch layout, panel colours and surface sample requirements.
Glossy Tarpaulin: Reinforcement Beneath the Surface
DLT-5105 is a 900gsm reinforced PVC material with a listed thickness of 0.7mm. The sheet contains a woven polyester base between two PVC films. This construction gives the surface its vinyl character while retaining textile reinforcement inside. Weight and thickness describe the complete material, so they should be read alongside the structure when comparing samples.
The specification lists lamination/coating and describes three laminated layers. In this type of composite, the film-to-fabric bond allows the separate components to function as one sheet during handling. The bond deserves attention where panels will be folded, joined or locally reinforced. A particular coating line, temperature or pass count is not stated for this model and cannot be inferred from its weight.
Glossy and matte surfaces are available. When specifying glossy tarpaulin, agree the actual gloss level and colour against a sample because reflections vary with viewing angle and lighting. A proposed inflatable arch may include several colours, printed areas and curved seams. The chosen surface should be reviewed across those areas before artwork or joining settings are fixed.
The listed supply dimensions are 1.05m to 3.2m wide in 50m rolls. Curved panel patterns need room for seam allowances and a consistent orientation of the reinforcing fabric. Material selection should be followed by evaluation of the proposed arch, including its seams, attachment points and inflation system. Those finished-unit details are separate from the roll-material specification.