DLT-6002
Pool Repair Vinyl
A polyester-reinforced pool repair sheet for trial patches on compatible liners.
- Weight
- 1050gsm
- Width
- 1-3.2Meters
Product images
TECHNICAL DATASHEET
| Material: | 100% Polyester |
|---|---|
| Base fabric: | 1300x1300D/30*30 |
| Weight: | 1050gsm |
| Thickness: | 1.0mm |
| Width: | 1-3.2Meters |
APPLICATIONS:
Product Features
- Polyester reinforcementA polyester textile base reinforces the pool repair sheet.
Identifying Both Materials at a Patch
A repair joins the selected patch to an existing liner whose composition and condition also need to be known. DLT-6002 lists a polyester base, total weight and thickness, but the current record leaves its surface polymer undefined. Confirm that surface before selecting a joining system. The reinforcement specification should accompany the sample so that the patch material is identified beyond its visible colour and overall thickness.
Checking the Joined Section
A patch introduces an edge and an overlap into the liner surface. Prepare a representative trial using the proposed DLT-6002 configuration and the identified original material. This provides evidence about the chosen repair assembly rather than only the unused sheet. The review should include surface preparation and relevant pool water conditions, while keeping any claimed joint performance tied to an actual documented test or approved procedure.
Application requirements — Swimming Pool Liners
Specify vessel or liner dimensions, liquid type, fill depth, support arrangement and the cleaning method. Review liquid compatibility, coating adhesion, seam integrity and the response to flexing and temperature. Distinguish a supported liner from a self-supporting finished vessel. Drinking-water, food-contact or other regulated uses need evidence for the exact proposed formulation and assembly.
Finished Pool-Liner Specifications
A reinforced pool liner is cut and joined to the pool vessel. Its finished dimensions follow the walls, floor, steps and fittings.
| Specification | Configuration |
|---|---|
| Finished Size | Measured vessel length, width and depth, including changes of level |
| Panel Layout | Separate wall and floor sections with planned seam positions |
| Perimeter Attachment | Compatible coated profiles or a welded fixing strip in a suitable hanging track |
| Panel Joints | Hot-air welded overlaps, or a membrane-specific butt-weld system where approved |
| Corners And Steps | Shaped pieces fitted to internal corners, stair risers and treads |
| Penetrations | Pool-compatible flanged fittings and gaskets at drains, inlets and other openings |
| Supporting Surface | Prepared smooth substrate with the specified protection or separation layer |
| Installation Check | Check joints and fitting seals before commissioning the completed pool |
Construction Details
Perimeter Fixing
The top edge is secured to the pool perimeter before the lining takes its final shape under water load.
Seams Around Fittings
Plan seam locations around fittings and corners so the installer can form and inspect each joint.
Product Videos 1 video
Swimming Pool Liner Fabric
Product Overview
Discuss the application.
For pool repair vinyl selection, identify the existing liner and confirm the patch surface and joining procedure.
Pool Repair Material and the Role of Its Reinforced Base
DLT-6002 is recorded as a 1050gsm pool material at 1.0mm thick, with a 1300D polyester base and a 30 × 30 construction. The reinforcement description identifies yarn size and arrangement. It does not, by itself, identify the exposed surface polymer or a particular coating process. Confirm the supplied surface composition before choosing a pool liner repair method.
A repair patch must work with the liner already in place. Its surface, flexibility and joining compatibility matter alongside the reinforcement within the replacement piece. A woven base can reinforce the patch, but it cannot establish compatibility with every existing membrane, adhesive or welding procedure. The conversion process should be selected around identified materials on both sides of the joint. A sample patch is most useful when it reproduces the actual overlap and the condition of the original liner.
DLT-6002 has a listed width range of 1–3.2m. For pool liner patches, cutting yield is only one consideration; the patch shape, edge preparation and surrounding liner condition also affect the proposed assembly. Keep the 1050gsm and 1.0mm measurements with the sample specification. Confirm the pool water conditions and cleaning regime, then review the chosen joining procedure on representative material. The present data does not provide a universal repair instruction or a finished patch strength, so those details belong to the converter’s approved repair construction.