DLT-5705
PVC Coated Polyester Fabric for Pallet Cover Panels
A woven polyester fabric with a PVC coating for truck covers and reusable industrial packaging.
- Weight
- 900gsm
- Width
- 1.05-3.2m
Product images
TECHNICAL DATASHEET
| Technology: | Knife Coated |
|---|---|
| Structure: | PVC coating+polyester base fabric+PVC coating |
| Base fabric: | 1000*1000D 30*30 |
| Weight: | 900gsm |
| Thickness: | 0.55mm |
| Width: | 1.05-3.2m |
| Roll length: | 50m/100m |
| Surface: | Glossy/Matte |
| Blockout: | Extra blockout layer available |
| Tensile Strength | 3800/3800 N/5cm DIN53354 |
| Tear Strength | 550/500 N/5cm DIN53356 |
| Adhesion | 140 N/5cm DIN53357 |
| Colour: | Customized |
| Temperature: | -20~+70(°C) |
| FR certification: | Customized B1, B2, M1, M2, NFPA701, DIN75200; |
| Packing: | Paper tube+PE film+Craft paper |
| MOQ: | 3000meters for customization |
APPLICATIONS:
Product Features
- Flame retardantOptionalAvailable as an optional configuration. A flame-retardant formulation for fabricators supplying projects with defined fire-behaviour requirements. Select the grade around the test method required for the finished application.
- BlockoutOptionalAvailable as an optional configuration. Restricts light passing through the fabric for roof, curtain or cover panels that need an opaque finish and greater control of the light behind the surface.
A Dense Polyester Reinforcement
DLT-5705 combines 1000D yarns with the listed 30×30 base construction. That information identifies the textile inside the PVC faces and should accompany the finished 900gsm weight in a material comparison. The 3800/3800N/5cm tensile figures describe intact strips; the 550/500N/5cm tear figures concern propagation from a cut. Keeping those tests separate helps explain why a finished panel needs more than a weight specification.
Adhesion at the Textile Interface
The listed 140N/5cm adhesion concerns the connection between PVC and polyester. This interface is relevant wherever the composite folds or is joined to another piece. Knife coating forms the PVC faces from paste on the fabric, followed by heating. Include the intended glossy, matte or optional blockout configuration in conversion trials, since the material used for production should match the sample used to establish a seam.
Application requirements — Truck Covers
Specify the finished cover dimensions, fixing arrangement, folding or rolling pattern and operating environment. Review tensile and tear properties, coating adhesion, abrasion at contact areas and the strength of seams and reinforced edges. State the required surface finish, flexibility and weathering conditions, and assess a sample in the proposed assembled construction.
Finished Flatbed-Tarp Configurations
The following dimensions describe a flatbed lumber tarp. Side curtains and roll-over roofs use their own body and hardware drawings.
| Specification | Configuration |
|---|---|
| Flat Size Example | 24 × 27 ft (approximately 7.32 × 8.23 m) |
| Side Drop Example | 8 ft (approximately 2.44 m) |
| End Flap Example | 8 × 8 ft (approximately 2.44 × 2.44 m) |
| Panel Seams | Heat-sealed body seams |
| Edge Construction | Double-stitched hems reinforced with 2 in (approximately 51 mm) webbing |
| Eyelet Spacing Example | 2 ft (approximately 610 mm) around the specified edges |
| Tie-Down Arrangement | Three D-ring rows with protective flaps in this configuration |
| Fit And Restraint | Set the cover around the actual load dimensions; cargo restraint is specified separately |
Construction Details
Reinforced Hem
The webbing runs within the hem to support the eyelets and stitched edge. Confirm corner and end-flap reinforcement on the finished drawing.
Protected D-Ring Attachment
D-rings are attached through reinforced areas, with flaps separating hooks from the tarp face. Choose ring positions to suit the load height and tie-down route.
Product Videos 3 videos
Truck Side-Curtain Fabric Production
Production & Material Footage
Discuss the application.
For PVC coated polyester fabric rolls, provide pallet dimensions, corner construction and closure details alongside the requested finish.
PVC Coated Polyester Fabric: Base Cloth and Adhesion
The reinforcement in DLT-5705 is a 1000×1000D polyester fabric with a listed 30×30 construction. PVC covers both sides through the specified knife-coating process. The finished material is listed at 900gsm and 0.55mm. Those figures describe mass per area and overall thickness; the woven core and coating bond explain how the components work together.
During knife coating, PVC paste is applied to the fabric and metered with a blade before heating forms the continuous faces. The textile reinforces the sheet along its two yarn directions. PVC encloses that textile, and adhesion describes the connection between them. A coating can look uniform while its bond still needs to be evaluated through the appropriate test.
DLT-5705 lists tensile strength of 3800/3800N/5cm and tear strength of 550/500N/5cm, with adhesion of 140N/5cm. Equal tensile figures do not make every other property equal in the two directions. Tear behaviour, seam orientation and the location of attachments should remain part of a converter’s review when laying out a cover panel.
Glossy and matte surfaces are listed, with an optional extra blockout layer. Available widths of 1.05m to 3.2m and 50m or 100m roll lengths support a cutting plan based on panel dimensions. For proposed pallet covers, assess folds and corner seams using the selected material. Closures and reinforcement must be specified for the completed cover, including how it will be handled and secured.