DLT-BNM
PVC Mesh Tarp for Debris Covers
An open PVC mesh with a choice of reinforcement constructions for dump-truck mesh tarps and sports windscreens.
Product images
TECHNICAL DATASHEET
| Item NO. | Weight | Basic fabric | OZ/SQ.YD | Width |
|---|---|---|---|---|
| DLT-BNM2424 | 130gsm | 250D*250D / 24*24 | 3.8 | 1.02m-3.2m |
| DLT-BNM1414 | 300gsm | 1000D*1000D / 14*14 | 8.8 | 1.02m-3.2m |
| DLT-BNM0707 | 450gsm | 300D*300D / 7*7 | 13.3 | 1.02m-3.2m |
| DLT-BNM1212 | 260gsm | 1000D*1000D / 12*12 | 7.7 | 1.02m-3.2m |
| DLT-BNM0404 | 300gsm | 1000D*1000D / 4*4 | 8.8 | 1.02m-3.2m |
| DLT-BNM1111 | 450gsm | 2520D*2520D / 11*11 | 13.3 | 1.02m-3.2m |
Scroll horizontally to view all columns.
APPLICATIONS:
Product Features
- Open mesh constructionThe spaces between the strands remain open across the sheet.
- Coated reinforcing strandsThe coating follows the strands and leaves the mesh openings visible.
An Open Reinforced Material
The BNM table offers several ways to combine yarn size and mesh construction. Comparing samples side by side helps show how much of the sheet is open and how the coated reinforcement behaves when folded. A debris tarp needs a mesh selected for its intended contents. Large visible openings and a heavy finished weight answer different questions, so neither should be used alone to select the grade.
Grade Details For Panel Fabrication
The range spans 130-450gsm and widths of 1.02-3.2m. Record the full BNM grade when requesting material because the family name covers several constructions. Use the selected mesh in a seam and reinforced edge sample before ordering finished panels. This shows how the fabric handles where its open field meets a continuous binding or attachment strip and provides a repeatable reference for later deliveries.
Application requirements — Sports Windscreens
Specify screen or banner dimensions, mesh openness, edge reinforcement, fixing spacing and exposure. Review tear behaviour around openings and attachment points, dimensional stability and the proposed printing or joining process. Wind loads and fixing requirements belong to the installed system and should be assessed with the supporting structure.
Finished Sports-Windscreen Configurations
Windscreen panels are sized to the fence and its supports. The following edge details describe a finished vinyl-coated polyester screen configuration.
| Specification | Configuration |
|---|---|
| Height Examples | 6 ft or 9 ft |
| Panel Length | Measured between the intended end fixing positions |
| Edge Hem Example | 1.25 in, three-ply reinforced hem |
| Eyelet Type Example | #2 brass grommets |
| Eyelet Spacing Example | 12 in along the perimeter |
| Corner Detail Example | Three grommets at each corner |
| Panel Schedule | Identify each fence run, gate and separate panel |
| Installation Brief | Specify the supporting fence and the required attachment arrangement |
Construction Details
Reinforced Perimeter
The hem supports the eyelets around the screen. Corner eyelets provide attachment positions where two edges meet.
Gate Panels
Keep gate screens separate from fixed fence runs so that opening the gate does not pull on an adjacent panel.
Product Videos 2 videos
PVC-Coated Mesh: Production and Samples
Production & Material Footage
Discuss the application.
For PVC mesh tarp rolls, identify the required BNM grade, debris size and panel finishing details.
PVC Mesh Tarp Construction And Grade Selection
The DLT-BNM PVC mesh tarp range combines a reinforcing fabric with an open construction. The published table covers six grades from 130gsm to 450gsm, with different yarn and construction notations. Open spaces are part of the material design. They allow air and some fine particles to pass, which matters when choosing material for a debris tarp rather than a continuous weather cover.
The table includes 250D, 300D, 1000D and 2520D yarn specifications. Denier describes yarn linear mass; it does not state the strength of the finished mesh. Construction figures such as 24×24 and 7×7 describe different arrangements, but their count units and the resulting opening size need confirmation. A close inspection of a sample gives information that finished weight alone cannot provide.
In PVC mesh materials, coating covers and binds the supporting textile while leaving openings in the finished sheet. The BNM table does not identify the coating equipment or application method. Assess the supplied grade for coating coverage, yarn intersections and handling. Total grams per square metre includes the supporting fabric and coating, so equal weights can represent different constructions within the range.
Listed widths are 1.02-3.2m. For debris tarp panels, select the mesh against the size of the material to be contained and the proposed panel assembly. Review hems and attachment zones on a fabricated sample. Retention of particular debris, lifting capability and the load capacity of the completed tarp require their own specification; they cannot be read from yarn size or roll weight.