DLT-6001
Reinforced Pool Liner
A polyester-reinforced material for fabricating swimming pool lining panels.
- Weight
- 950gsm
- Width
- 1-3.2Meters
Product images
TECHNICAL DATASHEET
| Material: | 100% Polyester |
|---|---|
| Base fabric: | 1300x1300D/30*30 |
| Weight: | 950gsm |
| Thickness: | 0.9mm |
| Width: | 1-3.2Meters |
| Options: | Flame retardent, Self cleaning surface |
APPLICATIONS:
Product Features
- Flame retardantOptionalAvailable as an optional configuration. A flame-retardant formulation for fabricators supplying projects with defined fire-behaviour requirements. Select the grade around the test method required for the finished application.
- Self-cleaning surfaceOptionalAvailable as an optional configuration. The surface finish helps dirt release from the coated face, supporting the appearance and routine care of exposed fabric panels.
Interpreting the Polyester Base
The 1300D and 30 × 30 entries in DLT-6001 describe the yarn and woven arrangement of its reinforcement. They do not state the composition of all exposed layers. A sample review should connect that base description with the complete material surface and thickness. This helps the converter work from a defined composite instead of assuming that the reinforcement entry also identifies the entire liner construction.
Considering the Finished Liner
A frame pool liner includes panel joints, shaped corners and openings in addition to the main sheet. DLT-6001 should be assessed within those details. Establish the surface composition and joining method first, then review a representative assembled section. Pool size, support, water treatment and cleaning conditions belong in that discussion; the listed mass and thickness alone do not determine the finished liner specification.
Application requirements — Swimming Pool Liners
Specify vessel or liner dimensions, liquid type, fill depth, support arrangement and the cleaning method. Review liquid compatibility, coating adhesion, seam integrity and the response to flexing and temperature. Distinguish a supported liner from a self-supporting finished vessel. Drinking-water, food-contact or other regulated uses need evidence for the exact proposed formulation and assembly.
Finished Pool-Liner Specifications
A reinforced pool liner is cut and joined to the pool vessel. Its finished dimensions follow the walls, floor, steps and fittings.
| Specification | Configuration |
|---|---|
| Finished Size | Measured vessel length, width and depth, including changes of level |
| Panel Layout | Separate wall and floor sections with planned seam positions |
| Perimeter Attachment | Compatible coated profiles or a welded fixing strip in a suitable hanging track |
| Panel Joints | Hot-air welded overlaps, or a membrane-specific butt-weld system where approved |
| Corners And Steps | Shaped pieces fitted to internal corners, stair risers and treads |
| Penetrations | Pool-compatible flanged fittings and gaskets at drains, inlets and other openings |
| Supporting Surface | Prepared smooth substrate with the specified protection or separation layer |
| Installation Check | Check joints and fitting seals before commissioning the completed pool |
Construction Details
Perimeter Fixing
The top edge is secured to the pool perimeter before the lining takes its final shape under water load.
Seams Around Fittings
Plan seam locations around fittings and corners so the installer can form and inspect each joint.
Product Videos 1 video
Swimming Pool Liner Fabric
Product Overview
Discuss the application.
For reinforced pool liner panels, confirm the surface construction, water conditions and proposed joining details.
The Reinforced Base Behind Pool Liner Panels
DLT-6001 is listed as a pool material with a 1300D polyester base in a 30 × 30 construction. Its recorded weight is 950gsm and its thickness is 0.9mm. The yarn designation describes the reinforcement rather than the whole sheet. The material entry identifies polyester, but the present record does not define the complete surface polymer or name a coating or lamination process. Those details should be established on the selected material sample.
A reinforced pool liner brings several material functions together. The textile base supplies a framework across the panel, while the exposed surfaces and their bonds determine how the complete sheet can be handled and joined. In frame pool liner panels, that material is converted into shaped sections with edges, overlaps and fittings. The base specification alone cannot establish a joining method, a finished seam strength or the suitability of the assembled liner for a particular pool geometry.
The available width is listed as 1–3.2m. Panel layout, corner details and the position of openings should be considered with the selected roll configuration. Review a sample of the actual surface and a proposed joined section before finalising fabrication. The 950gsm weight and 0.9mm thickness can help identify the supplied sheet, but they are not substitutes for the relevant performance data. Where pool water treatment, temperature or cleaning products are specified, the material selection needs to address those conditions directly rather than relying on the category name alone.