DLT-5210
Blockout Tarpaulin Option for Tent Roofs
A wide-format tent and hangar fabric with a blockout option.
- Weight
- 750gsm
- Width
- 5.0m
Product images
TECHNICAL DATASHEET
| Base fabric: | 1000D*1000D 30*30 |
|---|---|
| Thickness: | 0.58mm |
| Weight: | 750gsm |
| Width: | 5.0m |
| Roll length: | 50m |
| Tensile Strength: | 3300N/5cm |
| Tearing strength: | 430N/5cm |
| Peeling strength: | 100N/5cm |
| Surface: | Glossy/Matte |
| Options: | Blackout,Arcylic/PVDF coating, Flame retardant, Anti-cold/mildew/UV |
| Colour: | Customized |
| Temperature: | -20~+70(°C) |
| FR certification: | Customized B1, B2, M1, M2, NFPA701, DIN75200; |
| Packing: | Paper tube+PE film+Craft paper |
| MOQ: | 3000yards for customization/ 100yards for in-stock |
APPLICATIONS:
Product Features
- Flame retardantOptionalAvailable as an optional configuration. A flame-retardant formulation for fabricators supplying projects with defined fire-behaviour requirements. Select the grade around the test method required for the finished application.
- BlockoutOptionalAvailable as an optional configuration. Restricts light passing through the fabric for roof, curtain or cover panels that need an opaque finish and greater control of the light behind the surface.
Five-Metre Starting Width
DLT-5210 combines a listed 5.0m width with a 30×30 reinforcing construction. Wide stock can change panel nesting and the location of fabrication joins, but the final roof dimensions decide the actual result. Confirm the usable width and allow for hems, overlaps and attachment details. The 750gsm weight and 0.58mm thickness describe the composite sheet, rather than a structural rating for the completed tent.
Selecting the Blockout Version
Blockout, acrylic or PVDF coating, and glossy or matte finishes are listed selections for DLT-5210. A sample should identify which combination is being evaluated. Examine light transmission and both surface appearances under the lighting expected in use, then test the intended seam on that same version. The specification does not identify the exact production route or provide a universal blackout measurement for all supplied configurations.
Application requirements — Tent Roofs & Sidewalls
Specify the covered span, panel dimensions, support arrangement, installed tension and exposure. Review tensile and tear properties, coating adhesion, seam performance and the reinforcement around edges and attachment points. Set weathering, cleaning and fire-behaviour requirements around the finished structure and destination; the fabric data sheet does not establish structural wind or snow capacity.
Finished Frame-Tent Configurations
Roof covers are made to the tent frame and its bay spacing. Overall tent dimensions do not equal the flat cutting dimensions of a roof panel.
| Specification | Configuration |
|---|---|
| Small Frame-Tent Span Examples | 4 m, 5 m, 8 m or 10 m |
| Bay Spacing Examples | 3 m or 5 m, depending on the frame series |
| Overall Length | Repeated bays; confirm the minimum assembly and any end-bay changes for the selected frame |
| Side Height Examples | Approximately 2.3 m or 3 m in modular event-tent configurations |
| Roof Arrangement | Separate roof, gable and sidewall panels fitted to the frame geometry |
| Roof-Edge Connection | Keder edges retained in frame channels; bead and channel dimensions must match |
| Sidewall Arrangement | Divided wall panels, with ground bars or the selected frame system's bottom restraint |
| Site Design | Confirm frame anchoring, drainage and the complete structure's wind and snow requirements before fabrication |
Construction Details
Keder Edge And Frame Channel
The fabric edge carries a bead that slides into the frame channel. Specify the finished bead diameter and edge construction from the actual profile drawing.
Roof Panel And Bay Layout
A roof panel follows the pitch between frame members. Its finished length includes the attachment and tensioning details; fabric-roll width alone cannot define the cover size.
Product Videos 3 videos
DLT-5211 · 5 m Tent Fabric
Product Overview
Discuss the application.
For blockout tarpaulin rolls, specify the tent panel dimensions, required light control and selected finish.
Wide Blockout Tarpaulin: Reinforcement, Width and Light Control
DLT-5210 is a wide-format material listed at 750gsm and 0.58mm thick, with a 1000D×1000D, 30×30 reinforcing construction. Its 5.0m width gives the fabricator a different starting point from a narrow roll. Panel dimensions still determine whether joints are needed, so the usable width and cutting plan should be checked together.
Blockout is a listed option rather than a measured light-transmission result for every configuration. The reinforcing textile, PVC body and selected light-control construction perform different jobs within the finished sheet. A blockout requirement should therefore be specified on the sample and purchase order, with an agreed way to assess transmitted light. The published specification does not establish a particular coating or laminating production route.
Glossy and matte surfaces are available, while acrylic or PVDF coating is also listed among the options. These surface treatments need to be distinguished from the underlying reinforcing construction. Choose the actual finish before evaluating appearance and fabrication. Fire-retardant, anti-cold, anti-mildew and UV-related options likewise need confirmation for the supplied version rather than being treated as universal properties.
For a tent roof, the wide material may reduce the number of panel joins in a suitable layout. Seam design, roof tension and frame loads remain part of the finished shelter design. Use a production-representative sample to assess the selected blockout construction, surface and joining method. DLT-5210 is listed in 50m rolls, and the finished roof needs its own attachment and structural review.