DLT-5213
Tarpaulin Sheet for Salt Stockpile Covers
A wide-format tarpaulin for tent and shelter roofs, with glossy or acrylic-treated finishes listed.
- Weight
- 1000gsm
- Width
- 5.0m
Product images
TECHNICAL DATASHEET
| Base fabric: | 1000D*1000D 30*30 |
|---|---|
| Thickness: | 0.75mm |
| Weight: | 1000gsm |
| Width: | 5.0m |
| Roll length: | 50m |
| Tensile Strength: | 4100N |
| Tearing strength: | 500N |
| Peeling strength: | 140N |
| Surface: | Glossy/Acrylic treated |
| Blockout: | Extra blockout layer |
| Colour: | Customized |
| Temperature: | -20~+70(°C) |
| FR certification: | Customized B1, B2, M1, M2, NFPA701, DIN75200; |
| Packing: | Paper tube+PE film+Craft paper |
| MOQ: | 3000yards for customization/ 100yards for in-stock |
APPLICATIONS:
Product Features
- Flame retardantOptionalAvailable as an optional configuration. A flame-retardant formulation for fabricators supplying projects with defined fire-behaviour requirements. Select the grade around the test method required for the finished application.
- BlockoutRestricts light passing through the fabric for roof, curtain or cover panels that need an opaque finish and greater control of the light behind the surface.
Wide Roll, Planned Panel Joins
The listed 5.0m width and 1000gsm mass of DLT-5213 affect the starting layout and handling of a fabricated cover. Plan joints, overlaps and retained edges from the usable roll width. The 1000D×1000D, 30×30 base provides the specified reinforcing framework, but the completed cover still needs its own attachment design. Weight and width alone cannot establish the performance of a large secured sheet.
Finish and Contact Conditions
DLT-5213 lists glossy and acrylic-treated surfaces with an additional blockout layer. Select the construction before sample review, especially where the cover will contact a stored material. A proposed salt-cover use needs confirmation of compatibility and the cleaning conditions expected on site. The source does not provide a chemical-resistance test, so neither an acrylic finish nor the tarpaulin description should be used to imply one.
Application requirements — Tent Roofs & Sidewalls
Specify the covered span, panel dimensions, support arrangement, installed tension and exposure. Review tensile and tear properties, coating adhesion, seam performance and the reinforcement around edges and attachment points. Set weathering, cleaning and fire-behaviour requirements around the finished structure and destination; the fabric data sheet does not establish structural wind or snow capacity.
Finished Frame-Tent Configurations
Roof covers are made to the tent frame and its bay spacing. Overall tent dimensions do not equal the flat cutting dimensions of a roof panel.
| Specification | Configuration |
|---|---|
| Small Frame-Tent Span Examples | 4 m, 5 m, 8 m or 10 m |
| Bay Spacing Examples | 3 m or 5 m, depending on the frame series |
| Overall Length | Repeated bays; confirm the minimum assembly and any end-bay changes for the selected frame |
| Side Height Examples | Approximately 2.3 m or 3 m in modular event-tent configurations |
| Roof Arrangement | Separate roof, gable and sidewall panels fitted to the frame geometry |
| Roof-Edge Connection | Keder edges retained in frame channels; bead and channel dimensions must match |
| Sidewall Arrangement | Divided wall panels, with ground bars or the selected frame system's bottom restraint |
| Site Design | Confirm frame anchoring, drainage and the complete structure's wind and snow requirements before fabrication |
Construction Details
Keder Edge And Frame Channel
The fabric edge carries a bead that slides into the frame channel. Specify the finished bead diameter and edge construction from the actual profile drawing.
Roof Panel And Bay Layout
A roof panel follows the pitch between frame members. Its finished length includes the attachment and tensioning details; fabric-roll width alone cannot define the cover size.
Product Videos 3 videos
DLT-5213 · 5 m Tent Tarpaulin
Product Overview
Discuss the application.
For tarpaulin sheet rolls, provide the proposed cover layout, salt-contact conditions and edge-retention details.
Tarpaulin Sheet: A Wide, Reinforced Cover Material
DLT-5213 is a 1000gsm tarpaulin sheet listed at 0.75mm thick and 5.0m wide. The reinforcing base is specified as 1000D×1000D with a 30×30 construction. A fabricator receives a composite roll material whose textile framework, covering layers and finished surface need to be considered together when preparing a large cover.
The specification lists glossy and acrylic-treated surface selections, as well as an extra blockout layer. Surface treatment and internal light control are separate decisions: one concerns the exposed face, while the other concerns the covering construction. Approve the actual combination on a sample. The available model information does not establish whether a specific coating or lamination method is used, and does not provide a chemical-resistance result.
For a proposed salt stockpile cover, the application creates questions about seams, edge retention, handling and the material’s contact environment. Salt compatibility should be agreed for the actual conditions rather than inferred from the word tarpaulin. The cover designer also needs to address water drainage and the method of securing the sheet. The material’s mass does not establish the load capacity of those attachments.
DLT-5213 is listed in 50m rolls, allowing the cutting plan to be developed around the wide sheet. Confirm usable width before deciding where panel joins will fall. Evaluate a representative seam, reinforced edge and selected finish before production. Any fire classification or other project performance requirement should be matched to documentation for the ordered construction and the completed cover’s operating conditions.