DLT-5203
PVC Canvas for Tent Partition Panels
PVC films bonded around a polyester base for tent and shelter panels.
- Weight
- 550gsm
- Width
- 1.05-3.2m
Product images
TECHNICAL DATASHEET
| Technology: | Lamination / Coating |
|---|---|
| Structure: | PVC film+polyester base fabric+PVC film / 3 layers laminated |
| Base fabric: | 1000D 20*20 |
| Thickness: | 0.48mm |
| Weight: | 550gsm |
| Width: | 1.05-3.2m |
| Roll length: | 50m |
| Surface: | Glossy/Matte |
| Blockout: | Extra blockout layer available |
| Colour: | Customized |
| Temperature: | -20~+70(°C) |
| FR certification: | Customized B1, B2, M1, M2, NFPA701, DIN75200; |
| Packing: | Paper tube+PE film+Craft paper |
| MOQ: | 3000yards for customization/ 100yards for in-stock |
APPLICATIONS:
Product Features
- Flame retardantOptionalAvailable as an optional configuration. A flame-retardant formulation for fabricators supplying projects with defined fire-behaviour requirements. Select the grade around the test method required for the finished application.
- BlockoutOptionalAvailable as an optional configuration. Restricts light passing through the fabric for roof, curtain or cover panels that need an opaque finish and greater control of the light behind the surface.
What PVC Canvas Contains
The construction record for DLT-5203 names PVC film, polyester base fabric and PVC film. The internal textile is therefore part of the sheet even though the finished faces appear continuous. Its 1000D base and 20×20 construction describe reinforcement, while 550gsm measures the whole composite. Buyers can use these details to distinguish this material from an unreinforced film or a different textile sold under a similar canvas name.
Partition Appearance and Layer Choices
A proposed partition can call for a particular colour, surface reflection or level of light screening. DLT-5203 offers glossy and matte surfaces, with an extra blockout layer available. Identify the chosen construction on the sample and order before fabrication trials. The original laminate bond, a welded or sewn join, and the finished panel attachment are separate features to evaluate for the proposed partition.
Application requirements — Tent Roofs & Sidewalls
Specify the covered span, panel dimensions, support arrangement, installed tension and exposure. Review tensile and tear properties, coating adhesion, seam performance and the reinforcement around edges and attachment points. Set weathering, cleaning and fire-behaviour requirements around the finished structure and destination; the fabric data sheet does not establish structural wind or snow capacity.
Finished Frame-Tent Configurations
Roof covers are made to the tent frame and its bay spacing. Overall tent dimensions do not equal the flat cutting dimensions of a roof panel.
| Specification | Configuration |
|---|---|
| Small Frame-Tent Span Examples | 4 m, 5 m, 8 m or 10 m |
| Bay Spacing Examples | 3 m or 5 m, depending on the frame series |
| Overall Length | Repeated bays; confirm the minimum assembly and any end-bay changes for the selected frame |
| Side Height Examples | Approximately 2.3 m or 3 m in modular event-tent configurations |
| Roof Arrangement | Separate roof, gable and sidewall panels fitted to the frame geometry |
| Roof-Edge Connection | Keder edges retained in frame channels; bead and channel dimensions must match |
| Sidewall Arrangement | Divided wall panels, with ground bars or the selected frame system's bottom restraint |
| Site Design | Confirm frame anchoring, drainage and the complete structure's wind and snow requirements before fabrication |
Construction Details
Keder Edge And Frame Channel
The fabric edge carries a bead that slides into the frame channel. Specify the finished bead diameter and edge construction from the actual profile drawing.
Roof Panel And Bay Layout
A roof panel follows the pitch between frame members. Its finished length includes the attachment and tensioning details; fabric-roll width alone cannot define the cover size.
Product Videos 3 videos
DLT-5211 · 5 m Tent Fabric
Product Overview
Discuss the application.
For PVC canvas rolls, include the proposed partition layout, finish and light-screening requirements in the enquiry.
PVC Canvas: Reinforced Construction for Panel Fabrication
DLT-5203 is PVC canvas constructed from a polyester base and PVC films on both sides. The base is listed as 1000D with a 20×20 fabric construction. Its finished weight is 550gsm and its thickness is 0.48mm. Here, canvas is a product description for a reinforced PVC sheet; the stated structure identifies polyester as the textile within it.
The three-layer laminate is listed under lamination/coating technology. Manufacturing the composite brings its film layers together with the fabric, and the bond between those components affects how the sheet remains intact when handled. A material sample can reveal face consistency and the layered edge, while tests are needed to quantify adhesion and mechanical behaviour. A knife-coating route is not specified.
Glossy and matte surfaces and custom colours are available. For proposed tent partition panels, compare the selected colour under the lighting in which it will be used. The extra blockout layer is optional, so the base sheet should not be assumed to provide a blackout partition. Appearance, light transmission and the chosen edge or seam construction should be considered together.
The listed supply width is 1.05m to 3.2m, with a 50m roll length. Panel planning should account for seam allowances and the orientation of the base fabric. Custom fire requirements need suitable evidence for the ordered material and the intended setting. Finished partition attachments and supports remain part of the fabricated system design.