DLT-5208
PVC Tarp for Hay Stack Covers
A PVC laminate with a woven polyester base for shelter roofs and grain covers.
- Weight
- 900gsm
- Width
- 1.05-3.2m
Product images
TECHNICAL DATASHEET
| Technology: | Lamination / Coating |
|---|---|
| Structure: | PVC film+polyester base fabric+PVC film / 3 layers laminated |
| Base fabric: | 1000D 30*30 |
| Thickness: | 0.75mm |
| Weight: | 900gsm |
| Width: | 1.05-3.2m |
| Roll length: | 50m |
| Surface: | Glossy/Matte |
| Blockout: | Extra blockout layer available |
| Colour: | Customized |
| Temperature: | -20~+70(°C) |
| FR certification: | Customized B1, B2, M1, M2, NFPA701, DIN75200; |
| Packing: | Paper tube+PE film+Craft paper |
| MOQ: | 3000yards for customization/ 100yards for in-stock |
APPLICATIONS:
Product Features
- Flame retardantOptionalAvailable as an optional configuration. A flame-retardant formulation for fabricators supplying projects with defined fire-behaviour requirements. Select the grade around the test method required for the finished application.
- BlockoutOptionalAvailable as an optional configuration. Restricts light passing through the fabric for roof, curtain or cover panels that need an opaque finish and greater control of the light behind the surface.
Looking Beneath the PVC Surface
DLT-5208 uses a polyester base specified as 1000D, 30×30. The reinforcement is enclosed by PVC film, so it is not the exposed face of the finished sheet. The 900gsm weight includes both polymer and textile. Comparing the base and finished composite together gives a clearer construction picture than a weight-only description, particularly when material is cut into large panels with a defined fabric direction.
Laminate Configuration and Cover Assembly
The listed three-layer laminate is available with glossy or matte surfaces and an optional extra blockout layer. For DLT-5208, agree the required version before producing seams or reinforcement patches. A proposed hay-cover assembly also requires review of fastenings, support and moisture conditions. Those design choices should be evaluated with representative fabricated sections instead of relying on the uncut sheet specification alone.
Application requirements — Tent Roofs & Sidewalls
Specify the covered span, panel dimensions, support arrangement, installed tension and exposure. Review tensile and tear properties, coating adhesion, seam performance and the reinforcement around edges and attachment points. Set weathering, cleaning and fire-behaviour requirements around the finished structure and destination; the fabric data sheet does not establish structural wind or snow capacity.
Finished Frame-Tent Configurations
Roof covers are made to the tent frame and its bay spacing. Overall tent dimensions do not equal the flat cutting dimensions of a roof panel.
| Specification | Configuration |
|---|---|
| Small Frame-Tent Span Examples | 4 m, 5 m, 8 m or 10 m |
| Bay Spacing Examples | 3 m or 5 m, depending on the frame series |
| Overall Length | Repeated bays; confirm the minimum assembly and any end-bay changes for the selected frame |
| Side Height Examples | Approximately 2.3 m or 3 m in modular event-tent configurations |
| Roof Arrangement | Separate roof, gable and sidewall panels fitted to the frame geometry |
| Roof-Edge Connection | Keder edges retained in frame channels; bead and channel dimensions must match |
| Sidewall Arrangement | Divided wall panels, with ground bars or the selected frame system's bottom restraint |
| Site Design | Confirm frame anchoring, drainage and the complete structure's wind and snow requirements before fabrication |
Construction Details
Keder Edge And Frame Channel
The fabric edge carries a bead that slides into the frame channel. Specify the finished bead diameter and edge construction from the actual profile drawing.
Roof Panel And Bay Layout
A roof panel follows the pitch between frame members. Its finished length includes the attachment and tensioning details; fabric-roll width alone cannot define the cover size.
Product Videos 3 videos
DLT-5211 · 5 m Tent Fabric
Product Overview
Discuss the application.
For PVC tarp rolls, send the proposed stack-cover size, fastening layout and storage conditions with the required material finish.
PVC Tarp: A 30×30 Reinforced Laminate
DLT-5208 is PVC tarp material listed with a 1000D polyester base and a 30×30 fabric construction. PVC films enclose this reinforcement on both sides, forming a three-layer laminate. The finished sheet is 900gsm with a listed thickness of 0.75mm. Its surface appearance comes from PVC, while the fabric provides reinforcement inside the sheet.
The base construction, total mass and thickness should be read as separate fields. Yarn size describes a component of the textile, the 30×30 entry describes its arrangement, and 900gsm describes the complete composite. Adhesion joins those textile and film components. The listed lamination/coating technology does not justify adding a more specific coating method without confirmation.
Glossy and matte finishes and custom colours are available. An extra blockout layer may be specified. For a proposed hay stack cover, the material sample should be reviewed with the cover design and storage conditions, including contact points and how the sheet will be handled. The material record does not establish a ventilation strategy or a guarantee against condensation in stored agricultural material.
The width range is 1.05m to 3.2m, with 50m rolls listed. Use those dimensions to lay out panels and seams around the proposed stack. Edge reinforcement and fastenings belong to the finished cover, and they should be assessed with the selected sheet. Fabric direction and trial joins remain relevant when building a large cover from roll material.