DLT-5205
PVC Tarpaulin Material for Marquee Roof Panels
A three-layer PVC sheet with a polyester reinforcing core for temporary shelter roofs.
- Weight
- 680gsm
- Width
- 1.05-3.2m
Product images
TECHNICAL DATASHEET
| Technology: | Lamination / Coating |
|---|---|
| Structure: | PVC film+polyester base fabric+PVC film / 3 layers laminated |
| Base fabric: | 1000D 23*23 |
| Thickness: | 0.52mm |
| Weight: | 680gsm |
| Width: | 1.05-3.2m |
| Roll length: | 50m |
| Surface: | Glossy/Matte |
| Blockout: | Extra blockout layer available |
| Colour: | Customized |
| Temperature: | -20~+70(°C) |
| FR certification: | Customized B1, B2, M1, M2, NFPA701, DIN75200; |
| Packing: | Paper tube+PE film+Craft paper |
| MOQ: | 3000yards for customization/ 100yards for in-stock |
APPLICATIONS:
Product Features
- Flame retardantOptionalAvailable as an optional configuration. A flame-retardant formulation for fabricators supplying projects with defined fire-behaviour requirements. Select the grade around the test method required for the finished application.
- BlockoutOptionalAvailable as an optional configuration. Restricts light passing through the fabric for roof, curtain or cover panels that need an opaque finish and greater control of the light behind the surface.
The 1000D, 23×23 Base
DLT-5205 specifies the polyester core separately from its PVC faces. The 1000D value describes yarn size, and 23×23 records the fabric construction without supplying a unit in this record. The finished 680gsm belongs to all layers combined. These details should be retained on a material enquiry so that a visually similar sample is not accepted solely because its total weight matches.
Laminated Faces and Optional Blockout
PVC films cover the two faces of the DLT-5205 textile base. Their bond is part of the original laminate and should be distinguished from the seams used to assemble marquee panels. A glossy or matte finish and optional blockout layer should be chosen before sample approval. Evaluate joins and printed areas using that selected construction, since a change of face treatment or build warrants a fresh trial.
Application requirements — Tent Roofs & Sidewalls
Specify the covered span, panel dimensions, support arrangement, installed tension and exposure. Review tensile and tear properties, coating adhesion, seam performance and the reinforcement around edges and attachment points. Set weathering, cleaning and fire-behaviour requirements around the finished structure and destination; the fabric data sheet does not establish structural wind or snow capacity.
Finished Frame-Tent Configurations
Roof covers are made to the tent frame and its bay spacing. Overall tent dimensions do not equal the flat cutting dimensions of a roof panel.
| Specification | Configuration |
|---|---|
| Small Frame-Tent Span Examples | 4 m, 5 m, 8 m or 10 m |
| Bay Spacing Examples | 3 m or 5 m, depending on the frame series |
| Overall Length | Repeated bays; confirm the minimum assembly and any end-bay changes for the selected frame |
| Side Height Examples | Approximately 2.3 m or 3 m in modular event-tent configurations |
| Roof Arrangement | Separate roof, gable and sidewall panels fitted to the frame geometry |
| Roof-Edge Connection | Keder edges retained in frame channels; bead and channel dimensions must match |
| Sidewall Arrangement | Divided wall panels, with ground bars or the selected frame system's bottom restraint |
| Site Design | Confirm frame anchoring, drainage and the complete structure's wind and snow requirements before fabrication |
Construction Details
Keder Edge And Frame Channel
The fabric edge carries a bead that slides into the frame channel. Specify the finished bead diameter and edge construction from the actual profile drawing.
Roof Panel And Bay Layout
A roof panel follows the pitch between frame members. Its finished length includes the attachment and tensioning details; fabric-roll width alone cannot define the cover size.
Product Videos 3 videos
DLT-5211 · 5 m Tent Fabric
Product Overview
Discuss the application.
For PVC tarpaulin material rolls, specify the marquee panel dimensions and the colour, finish and blockout version to be reviewed.
PVC Tarpaulin Material: Reinforcement for Marquee Panels
DLT-5205 is PVC tarpaulin material with a listed 1000D polyester base and a 23×23 fabric construction. PVC film on both sides produces the stated three-layer laminate. The finished sheet weighs 680gsm and measures 0.52mm thick. These figures describe the complete composite, including its textile reinforcement and polymer faces.
The base specification helps explain the material beneath the surface. Yarn size and fabric construction influence the reinforcing textile, while the laminate bond links it to the outer PVC. The technology field lists lamination/coating and does not identify a knife-coating machine. When comparing this grade with other tent materials, keep construction and adhesion requirements alongside the finished weight.
Custom colours are listed with glossy or matte surfaces. An extra blockout layer is available for projects that require it, rather than an assumed feature of every sheet. A marquee roof sample should represent the selected colour, finish and light-control construction. If a fire classification is required, the evidence needs to match the material proposed for that order.
DLT-5205 is supplied in 50m rolls within a width range of 1.05m to 3.2m. A marquee pattern should allow for the fabric direction, overlaps and edge attachments. Joining trials can be carried out on a representative roof section. The material specification then forms one part of the completed marquee assessment, together with the frame, tensioning and water-shedding geometry.