DLT-5211
Blackout Tarpaulin Option for Shelter Panels
A wide-format reinforced sheet for tent or hangar roofs, with a blackout option.
- Weight
- 850gsm
- Width
- 5.0m
Product images
TECHNICAL DATASHEET
| Base fabric: | 1000D*1000D 30*30 |
|---|---|
| Thickness: | 0.65mm |
| Weight: | 850gsm |
| Width: | 5.0m |
| Roll length: | 50m |
| Tensile Strength: | 3300N |
| Tearing strength: | 430N |
| Peeling strength: | 100N |
| Surface: | Glossy/Matte |
| Options: | Blackout,Arcylic/PVDF coating, Flame retardant, Code-resistant, Anti-mildew, Anti-UV |
| Colour: | Customized |
| Temperature: | -20~+70(°C) |
| FR certification: | Customized B1, B2, M1, M2, NFPA701, DIN75200; |
| Packing: | Paper tube+PE film+Craft paper |
| MOQ: | 3000yards for customization/ 100yards for in-stock |
APPLICATIONS:
Product Features
- Flame retardantOptionalAvailable as an optional configuration. A flame-retardant formulation for fabricators supplying projects with defined fire-behaviour requirements. Select the grade around the test method required for the finished application.
- BlockoutOptionalAvailable as an optional configuration. Restricts light passing through the fabric for roof, curtain or cover panels that need an opaque finish and greater control of the light behind the surface.
- UV resistantOptionalAvailable as an optional configuration. UV-resistant treatment addresses sunlight exposure in outdoor fabric panels, making weathering requirements part of the material choice from the start.
- Mildew resistantOptionalAvailable as an optional configuration. A mildew-resistant formulation helps address surface growth in damp or humid service conditions and during storage between uses.
Reinforcing Base and Finished Weight
The 1000D×1000D, 30×30 entry describes the base construction of DLT-5211. Its 850gsm weight includes the finished composite rather than just the yarns. Keep that distinction when comparing samples, because two sheets with similar weight can distribute material differently. Review the specified base, thickness, bond and selected surface together before agreeing the fabric for a shelter panel layout. Retain the approved sample as the construction reference.
Blackout as a Sample Requirement
Use the blackout option on DLT-5211 as an explicit sample requirement. Assess the supplied version under the intended shelter lighting, including joins and any areas where the finished panel will be folded or attached. Glossy, matte, acrylic and PVDF selections should be recorded with that approval. Neither the listed name nor the optional fire classifications establish a tested result for every possible configuration.
Application requirements — Tent Roofs & Sidewalls
Specify the covered span, panel dimensions, support arrangement, installed tension and exposure. Review tensile and tear properties, coating adhesion, seam performance and the reinforcement around edges and attachment points. Set weathering, cleaning and fire-behaviour requirements around the finished structure and destination; the fabric data sheet does not establish structural wind or snow capacity.
Finished Frame-Tent Configurations
Roof covers are made to the tent frame and its bay spacing. Overall tent dimensions do not equal the flat cutting dimensions of a roof panel.
| Specification | Configuration |
|---|---|
| Small Frame-Tent Span Examples | 4 m, 5 m, 8 m or 10 m |
| Bay Spacing Examples | 3 m or 5 m, depending on the frame series |
| Overall Length | Repeated bays; confirm the minimum assembly and any end-bay changes for the selected frame |
| Side Height Examples | Approximately 2.3 m or 3 m in modular event-tent configurations |
| Roof Arrangement | Separate roof, gable and sidewall panels fitted to the frame geometry |
| Roof-Edge Connection | Keder edges retained in frame channels; bead and channel dimensions must match |
| Sidewall Arrangement | Divided wall panels, with ground bars or the selected frame system's bottom restraint |
| Site Design | Confirm frame anchoring, drainage and the complete structure's wind and snow requirements before fabrication |
Construction Details
Keder Edge And Frame Channel
The fabric edge carries a bead that slides into the frame channel. Specify the finished bead diameter and edge construction from the actual profile drawing.
Roof Panel And Bay Layout
A roof panel follows the pitch between frame members. Its finished length includes the attachment and tensioning details; fabric-roll width alone cannot define the cover size.
Product Videos 3 videos
DLT-5211 · 5 m Tent Fabric
Product Overview
Discuss the application.
For blackout tarpaulin rolls, send the shelter dimensions, light-control requirement and intended joining method.
Blackout Tarpaulin: Defining the Supplied Sheet
DLT-5211 is listed at 850gsm and 0.65mm, using a 1000D×1000D base with a 30×30 construction. The material is offered at 5.0m wide in 50m rolls. These figures describe the sheet available for fabrication; they do not identify the reinforcement mass separately or determine the strength of a completed shelter.
The blackout option needs to be treated as a defined material configuration. Reinforcement supplies the textile framework, while the surrounding material and selected light-control layer determine the sheet’s covering appearance. Confirm the actual construction and approve a sample for the required degree of light exclusion. The available data does not identify a specific coating or lamination process, so a blade-coating method should not be assumed.
The surface choices include glossy and matte finishes, with acrylic or PVDF coating also listed as options. These choices can change the surface being joined or printed and should be included in fabrication trials. Custom colour is available. Any fire-performance requirement needs evidence for the selected material and test classification; a list of optional classifications is not a certificate for every roll.
For shelter panels, plan the location of joins and attachments around the panel size and support system. The wide format may make some layouts simpler, but edge construction and seams still require evaluation. A useful sample review covers the surface, light control, fold behaviour and proposed join together. The finished shelter’s structural design remains separate from selecting an 850gsm sheet.